Clarion Platinum Sound Processor Betriebsanweisung Seite 27

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 36
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 26
27
Neurelec Digi SP’K
List of required parts
1
Digi SP’K speech processor
2
MLxi or MicroMLxS
Pre-Fitting
When using MLxi, it should be programmed for the specific
speech processor using FM SuccessWare (see page 32).
The Digi SP’K processor provides different programs that
can be configured for use by any auxiliary system.
These programs need to be adapted to different sound
environments following the procedure below.
Fitting with the user
1. Switch Off all equipment.
2. Plug the FM receiver directly into the auxiliary (“AUX”)
input of the processor. When MicroMLxS is used, move
the switch to the single green dot position.
3. Switch the processor On in the position defined for the
use of the auxiliary system. The processor automatically
detects the presence of the receiver.
4. Use the implant programming software to adapt thes
specific programs (copy the programs and authorize the
auxiliary input). Adapt the appropriate audio mixing ratio
of the FM and processor microphone.
5. Test the patient’s speech recognition in quiet with the CI
alone and then through the wireless FM system only (out
of range of the processor microphone). Performance
should be similar between these two conditions. If the
FM is too loud or too soft, it may be necessary to modify
the input gain (microphone and/or FM) until comparable
performance is achieved.
6. Evaluate FM benefit as well as the appropriateness of FM
settings through speech-recognition assessment in the
clinic and standardized questionnaires completed by the
recipient, family members and teachers.
Listening check
The environmental and FM signals can be checked using
the dedicated function in the implant programming
software.
Plug the MLxi or MicroMLxS into the headset checker
(See page 12). Turn On the headset checker and FM
transmitter and you should hear the FM signal.
Plug the MLxi or MicroMLxS into an audioshoe attached
to a hearing instrument. Turn On the hearing instrument
and switch it to the FM program if required.
1
2
Seitenansicht 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare