Clarion Platinum Sound Processor Betriebsanweisung PDF herunterladen (Seite 10)

MyLink+

The MyLink+ is a Dynamic FM receiver and

can be used with cochlear implants featuring

a T-coil

Overview

Frequency Management

MyLink+ is a multichannel Dynamic FM and can be synchro-

nized to any desired channel by the synchronization feature

of the transmitter or by the WallPilot. MyLink+ comes with a

pre-programmed default channel. Every time the system is

turned On, it will come on to this default channel. The default

channel can be changed by FM SuccessWare if required. It is

also possible to change the startup behavior of MyLink+ to

“use last used channel”. If this option is chosen, MyLink+ will

start up on the channel used before switching Off.

Using T-coil

Activate your T-coil program in your processor to receive the

FM signal from MyLink+. Some speech processors offer a T

only program. In that case no environmental cues are passed

on by the speech processor microphones.

Volume control

The up/down volume control makes it easy to adjust the FM

level to the most comfortable level. It is recommended to

set the volume to the minimum the first time the system is

switched On. After activating the whole system, the volume

can be increased gradually with the “+” button until the right

FM volume is achieved. Any change in volume setting is

stored and the MyLink+ resumes at the latest used volume

setting when switching Off and On again.

Monitoring

The MyLink+ is able to communicate with the inspiro

Dynamic FM transmitter. When running the Monitoring

option of inspiro, data from the receiver such as its serial

number and actual channel can be obtained. The range of the

communication link is about 20 cm.

Special note

The orientation of the T-coil in the speech processor, and

interferences from electrical appliances nearby, may compro-

mise the excellent sound quality of MyLink+.

Neck loop

Volume control

Status LED

On/Off switch

Charger plug

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare

Clarion Platinum Sound Processor Betriebsanweisung Seite 10

Kommentare zu diesen Handbüchern