Clarion S400 Bedienungsanleitung PDF herunterladen (Seite 22)

power saver mode

Your system will automatically enter Power Saver Mode while armed or

in override mode, after a period of time in which no operation has been

performed. This lowers the current draw to the vehicle’s battery. Power

Saver Mode takes over under the following conditions:

➤ Power Saver when the system is armed: After the system has

been armed for 24 hours, the LED will flash at half its normal

rate, decreasing the system's current draw.

➤ Power Saver in override mode: When the system enters

override mode the LED illuminates steadily. If the vehicle is not

used (ignition is not turned on) for a period of one hour while

the system is in override mode, the LED will shut off. If the

system remains in override mode, the LED will come back on

the next time the ignition is turned on and then back off.

programming options

Programming options control what your system does during normal

operation, and require few or no additional parts. However, some may

require additional installation labor.

The following is a list of the program settings, with the factory settings

in Bold:

➤ Active arming (only with the remote) or passive arming (auto-

matic arming 30-seconds after the last door has been closed).

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 35 36

Keine Kommentare

Clarion S400 Bedienungsanleitung Seite 22