Clarion S400 Bedienungsanleitung PDF herunterladen (Seite 15)

not arm, even with the remote, but all convenience functions (door

locks, trunk release, etc.) will continue to work normally.

To enter or exit override mode:

1. Turn the ignition on.

2. Turn the ignition off.

3. Press and release the Override

switch within 10 seconds.

The status LED will light solidly if you are entering override mode, and

it will go out if you are exiting override mode.

To enter or exit override mode using the remote:

1. Open any vehicle door.

2. Press .

3. Press .

4. Press again.

The status LED will light solidly if you are entering override mode, and

it will go out if you are exiting override mode.

false alarm prevention circuitry

Your system has false alarm prevention circuitry. It prevents annoying

repetitive trigger sequences due to faulty door pin switches or environ-

mental conditions such as thunder, jackhammers, airport noise, etc.

Example

If the alarm triggers three times within a 60-minute period and each

time the same sensor or switch triggers the alarm, the system will

DRW-35

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 35 36

Keine Kommentare

Clarion S400 Bedienungsanleitung Seite 15