Clarion S400 Bedienungsanleitung PDF herunterladen (Seite 13)

out visually checking the vehicle. Pressing after resetting the sys-

tem will disarm the system; pressing this button during the first six sec-

onds of the triggered sequence will disarm the security system imme-

diately. The six second timer is provided for your convenience, in case

the system is accidentally triggered.

disarming without a remote

This feature allows you to disarm the security system without the

remote should it be lost, damaged, or disabled. In order to disarm the

system without a remote, you must have the vehicle’s ignition key and

know where the Override switch is located. Be sure to check with the

installer for the location and the number of presses of the Override

switch required to disarm the system.

To disarm the security system,

turn the ignition to the ON posi-

tion. Press the Override switch

the preset number of times (one

to five times) within 15 seconds.

After five seconds the system

will disarm. If the system does

not disarm, you may have wait-

ed too long; turn the ignition

off and on and try again.

Location of Override switch _________________________________

Number of Pulses ______________________________________

DRW-35

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 35 36

Keine Kommentare

Clarion S400 Bedienungsanleitung Seite 13