Clarion M10 Series Bedienungsanleitung PDF herunterladen (Seite 9)

C-SPEC CORPORATION WIRELESS PRODUCTS

CLARION MerLAN M10 7

SPECIFICATIONS

The following figure represents the current specifications for the Clarion

MerLAN M10 unit.

Frequency Range: 2.416 - 2.456 GHz ISM band

Carrier Frequency 2.436 Ghz

Modulation Technique: Spread Spectrum - BPSK, 32 Mcps

Output Power: 25 mW (14 dBm)

Receive Sensitivity -86 dBm

Data Rate: 10 Mbit/sec.

Media Access Protocol: Ethernet Variety (CSMA/CA)

Power Consumption (TX): 1.6 - 2.0 Amp

Power Consumption (RX): 1.1 - 2.0 Amp

Power Requirements 6.2VDC (min 6.0, max 6.85)

Power Supply (Input) 100-125VAC

Power Supply (Output) 6.2VDC 2A

Operating Temperature 0 - 40 C

FCC Regulations: No site license required

Figure 1 MerLAN M10 Specifications

CONNECTIVITY

The MerLAN M10 can be directly connected to several types of LAN devices

by means of the MAU port on the unit. It can be connected directly to

personal computers, routers, bridges, and hubs by means of the AUI port on

those devices. A standard AUI cable can be connected to the MerLAN M10

and any of these units via their AUI port. A more detailed description of

these connections follows. The main concern is how the MerLAN M10 is

configured when attached to these various devices.

PERSONAL COMPUTERS

The MerLAN M10 can be connected directly to the AUI port of a network

adapter card of a personal computer by using a standard AUI cable. If the

network adapter card in the PC has a 10Base-T connection, that connection

can be used to connect to the MerLAN M10 by means of an AUI to 10Base-T

media converter that also crosses over the send and receive data signals. The

default configuration parameters should be used when the MerLAN M10 is

connected to a personal computer.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 20 21

Keine Kommentare

Clarion M10 Series Bedienungsanleitung Seite 9