Clarion NX509 Bedienungsanleitung Seite 60

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 69
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 59
58
NX509
English
INSTALLATION
MANUAL
Installation Notes
CAUTION
CAUTION
Use only the supplied parts.
If unspecified parts are used, they may
cause damage.
Any holes made in the body of the vehicle
should be sealed with a silicon adhesive.
If exhaust fumes or water penetrates into
the vehicle, this may cause an accident.
Fasten the bolts securely when installing
the unit. If the bolts are loose an accident or
malfunction could occur.
Connection Notes
CAUTION
CAUTION
Verify wires with a digital multi-meter prior
to making any connections. Many new
vehicles use multiplexed and/or low voltage
circuits that can be damaged if a test light
or logic probe is used.
Connect cables appropriately. If a wrong
connection is made, this may cause a fire or
accident.
When passing cables through the body of
the vehicle, use non-conductive grommets.
If the coatings of the cables are worn out by
rubbing, this may cause an accident, fire or
a short circuit.
After wiring cables, fix them with insulation
tape.
Be sure to switch off the vehicle when
connecting or disconnecting cords to/from
the unit, otherwise an electric shock, injury
or accident may occur.
2. PACKAGE CONTENTS
1 Main unit
2 Owner’s Manual (this book)
3 Navigation System Operation Manuals
4 Power supply cord
5 RCA pin cord
6 Bag for accessories
Flat head screw (M5 u 8 mm)...................... 8
Hexagonal bolt (M5 u 8 mm) ....................... 8
Electro tap ................................................... 1
Rubber cap (for RCA pin cord) .................. 14
Lead holder.................................................. 3
Double-sided tape
for fastening GPS antenna .......................... 1
7 Remote control unit
8 Battery
9 Finisher
0 Warranty card
! GPS antenna
WARNING
Please note the position of pipes, tanks
and electrical wirings before installing
the unit into the vehicle; failure in
avoiding these may cause a fire or
malfunction.
WARNING
Loom all cables according to the
instruction manual, so as not to hinder
operation.
Wire the connecting cords/cables away
from high temperature areas. If the
coatings of the cables melt, it could
cause an accident/fire by a short circuit.
Take care when wiring in the engine
compartment.
When wiring the connecting cables in a
vehicle with an airbag system, never feed
the cables through a place where it may
affect the operation of the airbag.
An airbag not operating correctly in an
emergency may cause increased injury.
Seitenansicht 59
1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 68 69

Kommentare zu diesen Handbüchern

Keine Kommentare