Clarion NX509 Bedienungsanleitung PDF herunterladen (Seite 24)

NX509

English

Owner’s manual

Seek tuning

1. Touch the [Band] key to select the desired

band (FM or AM).

2. Touch the [{ (Seek)] or [} (Seek)] key to

automatically seek a station.

• When touching the [{ (Seek)] key, the

station is sought in the direction of higher

frequencies.

• When touching the [} (Seek)] key, the

station is sought in the direction of lower

frequencies.

Manual tuning

There are 2 ways available: Quick tuning and

step tuning.

When it is in the step tuning mode, the frequency

changes one step at a time. In quick tuning mode,

you can quickly tune the desired frequency.

1. Touch the [Band] key to select the desired

band (FM or AM).

2. Tune into a station.

Quick tuning:

Touch and hold the [{ (M-Seek)] or [} (M-

Seek)] key to tune in a station.

Step tuning:

Touch the [{ (M-Seek)] or [} (M-Seek)] key

to manually tune in a station.

Recalling a preset station

There are total of 30 preset positions (6-FM

Home 1, 6-FM Home 2, 6-AM Home, 6-FM

Travel, and 6-AM Travel) to store individual radio

stations in memory.

1. Touch the [Home Travel] key to select the

Home or Travel mode.

2. Touch the [Band] key to select the band.

3. Touch the corresponding Preset key to recall

the stored station.

• Touching and holding the desired Preset

key for more than 2 seconds will store the

current station to the preset memory.

Manual memory

1. Touch the [Home Travel] key to select the

Home or Travel mode.

2. Touch the [Band] key to select the band you

wish to store.

3. Tune in the station you wish to store using the

seek tuning, manual tuning, or preset tuning.

4. Touch and hold the desired Preset key you

wish to store the current station for more than

2 seconds.

Auto Store

The Auto Store is a function for storing up to 6

stations that are automatically tuned in

sequentially. If 6 receivable stations cannot be

received, a previously stored station remains

unoverwritten at the memory position.

• The Auto Store function works only in the

Travel mode.

1. Touch the [Home Travel] key to select the

Travel mode.

2. Touch the [Band] key to select the band.

3. Touch the [Auto Store] key to start scanning

stations.

A beep sounds and the stations with good

reception are stored automatically to the

preset channels.

•“AS” appears during scanning stations. To

stop the scanning, touch the [Auto Store]

key again.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 68 69

Kommentare zu diesen Handbüchern

Keine Kommentare

Clarion NX509 Bedienungsanleitung Seite 24

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Auto-Medienempfänger Clarion NX509