Clarion HX-D2 Bedienungshandbuch PDF herunterladen (Seite 16)

20 HX-D2

English

About gain (G)

This function allows you to adjust how much the

output level is to be lowered.

●Characteristics during gain adjustment

0dB

-24dB

SUB-WOOFER LOW MID HIGH

About phase (PHASE)

The factory default setting is "NOR" (forward

phase). Try switching between "NOR" (forward

phase) and "REV" (reverse phase) and select

the setting that sounds most natural to you.

Adjusting the position (TIME ALIGN)

●About the time alignment function

This function allows you to adjust the speakers

so that any listener in the car can obtain the

same sound effect from the speakers.

∗ This item can be adjusted when the Audio mode is

the Standard mode or the Multi mode.

1. Press the [ADJ] button.

2. Press the [ ] or [ ] button to select

"SOUND".

3. Press the [s] button.

4. Press the [ ] or [ ] button to select "TIME

ALIGN".

5. Press the [ ] or [ ] button to select "

FRONT " or " HIGH ".

∗ Select " FRONT " when the Audio

mode is the Standard mode, and " HIGH

" when the Audio mode is the Multi mode.

6. Press the [ ] or [ ] button to select the

speaker to adjust.

* The mute function of a selected speaker can

be turned ON/OFF by pressing the [ROTARY]

knob while the speaker is selected.

Each press of the button switches the setting as

follows.

Operations Common to Each Mode

In the Standard mode:

FRONT







FRONT







FRONT







FRONT







REAR







REAR







SUB-W







SUB-W

7. Press the [ ] button. The setting value is

displayed.

8. Press the [s] button. The setting value

blinks.

9. Press the [ ] or [ ] button to set the

distance from the speaker up to the listener.

∗ The adjustment range is 0 cm to 512.4 cm (in

about 0.7 cm steps).

∗ The range can be adjusted in about 7 cm

steps by holding down the [ ] or [ ] buttons.

∗ For details, see "Appendix : Time Alignment

List" (page 32).

10.When you have finished the adjustment,

press the [s] button to return to the

screen in step 7. This sets the setting value.

11.Press the [ ] button to return to the screen

in step 6.

12.Repeat steps 6 to 11 to adjust the position of

each speaker.

13.Press the [ADJ] button to return to the

previous mode.

Blinking

In the Multi mode:

HIGH

HIGH

MID

MID

LOW

LOW

SUB-W

SUB-W

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 30 31

Kommentare zu diesen Handbüchern

Keine Kommentare