Clarion HX-D2 Bedienungshandbuch PDF herunterladen (Seite 8)

12 HX-D2

English

Adjusting the bass/treble

This function is used to set the tone in more

detail for listening.

• The tone can be adjusted when the Equalizer

mode is set to "BASS/TREB".

∗ This can be adjusted when the Audio mode is the

Standard mode or the Multi mode.

∗ The factory default setting is "0 dB".

1. Press the [A-M] button to select "BASS" or

"TREB".

2. Press the [ ] or [ ] button to adjust the

output volume.

∗ The adjustment range is -12 dB to +12 dB

3. Press the [A-M] button several times to

return to the previous mode.

Adjusting the balance/fader

• "FADER" (fader) can be adjusted when the

Audio mode is the Standard mode or the

Direct mode.

∗ The factory default setting is "0".

1. Press the [A-M] button to select "BAL" or

"FADER".

2. Press the [ ] or [ ] button to adjust the

volume.

●Adjusting the balance (volume of the left

and right speakers)

To enhance the left side, press the [ ] button.

To enhance the right side, press the [ ]

button.

∗ The adjustment range is L13 to R13.

●Adjusting the fader (volume of the front

and rear speakers)

To enhance the rear side, press the [ ] button.

To enhance the front side, press the [ ]

button.

∗ The adjustment range is R12 to F12.

3. Press the [A-M] button several times to

return to the previous mode.

Turning on/off the display

You can turn the display ON/OFF by holding the

[A-M] button down for at least one second.

You can also turn the display ON by pressing the

[DISP] button while the display is OFF.

Adjusting the tone

Press the [A-M] button and select the item to

adjust. Each time you press the [A-M] button,

the item changes in the following order:

∗ "BASS" and "TREB" are displayed when "BASS/

TREB" are selected at EQ SELECT.

● When “STD” is set

“SW-VOL”

∗1

➜ “BASS”

∗2

➜ “TREBLE”

∗2

➜

“BAL” ➜ “FADER” ➜ Last function mode.

● When “DIRECT” is set

“N-FAD VOL” ➜ “BAL” ➜ “FADER” ➜

Last function mode.

● When “MULTI” is set

“SW-VOL”

∗1

➜ “BASS”

∗2

➜ “TREBLE”

∗2

➜

“BAL” ➜ Last function mode.

∗1

The item can be adjusted when the sub-woofer

setting is not set to "OFF".

∗2

The item can be adjusted when "EQ SELECT" in

the Adjust mode is set to "BASS/TREB".

Adjusting the volume of sub-

woofer/non-fader output

These items can be adjusted when the sub-

woofer/non-fader setting is "ST" (stereo) or

"MONO" (monaural).

∗ The factory default setting is "0.0 dB".

1. Press the [A-M] button to select "SW-VOL"

or "N-FAD VOL".

∗ Select "SW-VOL" when the Audio mode is the

Standard mode or the Multi mode, and "N-

FAD VOL" when the Audio mode is the Direct

mode.

2. Press the [ ] or [ ] button to set the output

volume.

∗ The adjustment range is -10.0 dB to +10.0 dB

(0.5 dB steps).

3. Press the [A-M] button several times to

return to the previous mode.

Basic Operations

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 30 31

Kommentare zu diesen Handbüchern

Keine Kommentare