Clarion FX503 Bedienungshandbuch PDF herunterladen (Seite 38)

36 NX604/FX503

English

Adjusting the screen size

(Android smartphones only)

During Smartphone linking, the left and

right, or top and bottom of the screen

sometimes displays black because of

different resolutions on the unit and the

smartphone. The screen size can be

corrected by the following procedure.

Notice

•Ifyoucannottouch

,updateSmart

Accessonthesmartphone.

1

During Smartphone

linking

Smart Access

(long press).

The side menu is displayed.

2

:

The screen returns to the

application list screen.

:

The screen returns to the previous

screen when the screen is not

displayed the application list

screen.

:

This hides the side menu.

3

Adjust the screen size.

:

This reduces the height of screen

size.

:

This increases the height of screen

size.

:

This reduces the width of screen

size.

:

This increases the width of screen

size.

Reset to Factory Setting:

This resets the screen size after

correction to their factory settings.

Back:

This cancels the settings and

displays the application list screen.

4

OK

5

Check

After adjusting the screen size, go

on to correct the touch position on

screen.

(For Android smartphones)

1.

Set “Android” for “

Device Type

” on the

Settings menu.



P.44

2. Start Smart Access on the

smartphone.

3. Set “Usage Setting” in “BT Devices

Connection” on the Settings menu,

and then connect your smartphone

via Bluetooth.



P.31

4. Connect the unit to the smartphone.

The following two connection methods

are also available for some smartphones.

The unit

HDMI cable

(sold separately)

Connect to the

cigarette lighter port,

etc. on the vehicle to

supply power.

HDMI conversion cable

(commercially available

product)

1. For MHL connection

2. For HDMI connection

The unit

HDMI cable

(sold separately)

Attention

•UseonlyanHDMIconversioncablethat

supportsEDIDtransfer.

5. Start the application on the unit.

Starting up applications

Notice

•Theunitsometimesdoesnotsupport

smartphonemulti-touchorflicking

functions.

•Applicationscannotbeaddedordeleted

fromtheunit.Executeadditionordeletion

ofapplicationsonthesmartphone.

•DuringSmartphonelinking,donotset

thesmartphonetoasleepstate.Doing

somightpreventthesmartphonefrom

functioningproperly.

MEMO:

•WhenSmartAccessisusedforthefirst

time,theTermsofUseconfirmation

screenisdisplayed.Checkthetermsof

use,andtouch Check .

•“!”willbedisplayedwhenthereisa

newversionofSmartAccessavailable.

ToupdateSmartAccess,removethe

smartphonefromtheunit,andexecute

theupdatebyoperatingtheapplicationon

thesmartphone.

1

MENU

Smart Access

Start up Smart Access. The list of

linking-related applications installed

on the smartphone is displayed.

When an application is started up

on the smartphone, the screen is

switched to the application screen.

2

Select the application you want

to start up.

The application starts up. The

application can be operated from

screens on the unit as if you are

operating the smartphone.

Touch

MENU

Smart Access to

return to the application list screen.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 66 67

Kommentare zu diesen Handbüchern

Keine Kommentare